Branch Outlet Fittings Manufacturer In India
Certificates & Approvals
Our Products
Manufacturer, exporter & suppliers of carbon steel Pipe Outlet Fittings, stainless steel Pipe Outlet Fittings, alloy steel Pipe Outlet Fittings
We are manufacturer & exporters of Stainless Steel Pipe Outlet Fittings, for the Oil, Gas, Nuclear, Petro-Chemical and Process Industries. We can manufacture Pipe Outlet Fittings upto 48″ with wall thickness ranging from 1.5 mm thickness up to 40mm for varied sizes.
Pipe Outlets Material
Stainless Steel Pipe Outlets – Welding Outlets, Socket Weld Outlets, Threaded Outlets | ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L |
Alloy Steel Outlets – Welding Outlets, Socket Weld Outlets, Threaded Outlets | ASTM / ASME A/SA 182 F1/F5/F9/F11/F22/F91 |
Carbon Steel Outlets – Welding Outlets, Socket Weld Outlets, Threaded Outlets | ASTM A 105/A694/ Gr. F42/46/52/56/60/65/70 |
Duplex Steel Outlets – Welding Outlets, Socket Weld Outlets, Threaded Outlets | ASTM / ASME A/SA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61. |
Low Temperature Carbon Steel Outlets – Welding Outlets, Socket Weld Outlets, Threaded Outlets | A350 LF3/A350 LF2 |
Nickel Alloy Outlets – Welding Outlets, Socket Weld Outlets, Threaded Outlets | ASTM / ASME SB 564 / 160 / 472 – UNS 10276 (HASTELLOY C 276 Outlets), UNS 2200 (NICKEL 200 Outlets), UNS 2201 (NICKEL 201 Outlets), UNS 4400 (MONEL 400 Outlets), UNS 8020 (ALLOY 20 Outlets), UNS 8825 (INCONEL 825 Outlets), UNS 6600 (INCONEL 600 Outlets), UNS 6601 (INCONEL 601 Outlets), UNS 6625 (INCONEL 625 Outlets) |
Copper Alloy Outlets – Welding Outlets, Socket Weld Outlets, Threaded Outlets | ASTM / ASME SB 61 / 62 / 151 / 152 – C70600 (CUNI-90/10 Cupro Nickel Outlets), C71500 (CUNI-70/30 Copper Nickel Outlets) |
Type of Pipe Outlet Fittings
Type A Pipe Outlet Fittings, Decreased pressure factor
Same wall thickness on the weld ends and on the fi tting body as for a pipe with the same specifi ed wall thickness. Their resistance to internal pressure is less than that of a pipe with the same diameter, same wall thickness and made of the same grade of steel.
The required calculation methods are based on the calculation standards defined in EN 13480-3
Type B Pipe Outlet Fittings, Full pressure factor
Increased wall thicknesses on the fi tting body, same resistance to internal pressure as for a pipe with the same diameter, same wall thickness and made of the same grade of steel.
The required calculation methods are based on the calculation standards defined in EN 13480-3
Pipe Outlet Fittings Marking
Each fitting must be permanently marked.
Marking through hard stamping.
- Manufacturer‘s mark or logo
- Country of manufacture (ISO-Code)
- “EN2” as reference to this standard
- “B” for fittings of type B
- Steel name or steel number
- “W” (for welded fittings or fittings that are manufactured from welded pipes)
- Cast number or code number
- Mark of the inspection representative
- Outside diameter D*
- Wall thickness T*
Preparation Pipe Outlet Fittings for shipment, handling and packaging
EN 10253-2 Fittings & Pipe Outlet Fittings are delivered with or without surface protection at the discretion of the manufacturer.
EN 10253-4 Fittings & Pipe Outlet Fittings are delivered by the manufacturer in normal packaging, without surface protection, and without end protectors (caps). Special packaging, protective coverings, and end protectors (caps) can be agreed.